The PET strap production line can use the recycled material producing new products

Technical parameter:

1. Raw material: Recycled PET bottle flakes (or PET pellets)

2. Product: PET strap

Width: 9mm-22mm

Thickness: 0.6mm-1.5mm

3. Output:

80-100kg/hr with one mould

160-180kg/hr with two moulds

320-400kg/hr with four moulds

4. Workers: 2 -3 workers per shift, 12 hours/shift.

Characteristic:

1)Raw material recycled PET flakes are crystallized by CSG series drying system, its dew point of -40 makes the moisture no more than 40PPM, whats more, this device can increase the viscosity of the PET flakes.

2)The extruder adopts the special screw for PET flakes, the screws unique separation and mixing ability ensure the materials are plasticized more even; Thanks to the meter pumps the dosing and steady extrusion assure even length and width of the straps.

3)The mould with different standards; Leakage is eliminated after the improvement of the melt exchanger.

Today's advanced technology and turnkey services meet customer 's requirement from design to installation and on site maintenance